Thursday
Apr162020

Survive the Virus...Rebuild Time!

Don't waste this down time, now is the time for rebuilding the old bike. Visit www.rockymountainatv.com  for all your repair needs.

 

If you need to rebuild the top end on a Yamaha four stroke motor, but you are not sure what to do, you are at the right place. Our detailed instructional video will walk you through how to rebuild the top end on a modern day WR250F motor. Watch our industry expert as he rebuilds the top end on a Yamaha WR250F motor. The steps shown in this video will be the same as they are on a YZ250F and the WR450F and YZ450F. Trust us to have the answers and instructions you are looking for. Get all your bike rebuild needs at https://www.rockymountainatvmc.com !

 

Watch for part 2

Tuesday
Apr142020

EKS GOX Enduro Goggles Review

 

EKS BRAND GOX ENDURO/OTG GOGGLE


 

 

PRODUCT: EKS Brand goggles have been around for many years, but its new $49.99 Enduro/OTG goggle is new. It is based on the comfortable and flexible poly-flex GOX Flat Out Elite series goggle. It can use any of the many GOX lenses, but it comes fitted with a single-pane smoked lens with vents in the upper part of the lens. The vents are back with foam. A second clear vented lens and a protective goggle bag are included. Both lenses come equipped with integrated pins for tear-offs. Triple-layer face foam that is a full inch thick sets the Enduro/OTG goggle apart from the GOX. It has a layer of sweat-wicking fleece that contacts your face. The thick foam has molded indents that allow the face foam to allow room for eyeglass frames.

OUR TAKE: Vision is super important while riding or driving, and if you wear corrective eyeglasses, you undoubtedly face challenges. For some vision-challenged folks, contacts can do the trick; for others, glasses are the only answer, but you must fit them inside the goggles. The EKS Brand Enduro/OTG goggle will not fit over large eyeglass frames, but it worked on smaller-framed glasses just fine. Our first ride with the Enduro goggle was 32 miles of tight singletrack. We were wearing a jacket for the brush, and normally it would have been fog city, but the anti-fog-coated lens (we opted for clear) with vents kept us fog-free all day.

 

Some OTG goggles have a strap that is too short. It is difficult to wear a goggle over glasses if the strap is too tight, but the EKS Enduro goggle has an adjustable, double-buckle strap that is plenty long over an XL helmet. The strap is silicone-backed to keep it in place on your helmet. In faster, dusty conditions, neither the foam-backed lens vents nor the vent foam in the frame passed much dust, and we were able to wipe the Lexan lens with a glove to wipe the dust while riding. Despite the cool days, fogging was not an issue.

For the enduro-minded rider and the pilot who wears glasses, this is an excellent option. It flows more air, it’s super comfortable, the vented lens fights fogging, and it’s sized nicely if you wear regular to smallish spectacles. Hopefully we’ll see a larger version in the future (since larger-framed glasses are in vogue), but as it is, the Enduro/OTG goggle comes in two colors (black or liquid cyan) and is a worthy addition for the off-road, vision-challenged rider.
PRICE: $49.99    CONTACT: www.eksbrand.com

 

 

 

Tuesday
Mar032020

Works Connection Protects Your KTM/Husky

 

 

 

WORKS CONNECTION 2019-20 KTM 250/350SX-F / HUSQVARNA FC250/350 MX SKID PLATE 

                                         PN 10-439                    Retail $84.95                                              

Works Connection has just released its MX style Skid Plate for '19-‘20 KTM 250/350SX-F’s and '19-‘20 Husqvarna FC250/350 models. Coverage includes protection for the center cases, frame rails and clutch side case. A CNC’d front bracket and single bolt for the rear mount makes installation simple and reliable. Convenient oil drain access hole means oil changes are quick and easy without having to remove the skid plate.            

 

Contact your retailer or visit worksconnection.com

  • Unique Rubber Isolator Mounting System (RIMS)
  • Integrated clutch side case protection with impact bumpers
  • CNC’d and formed from aircraft grade 6061 T-6 aluminum
  • Oil drain access hole pre-cut into the plate for easy oil changes without having to remove the skid plate
  • CNC’d aluminum bracket with quality hardware for secure mounting
  • Made in the USA

 

 

 

 

About Works Connection:

Established in 1989 with the desire to produce ‘Works’ type products and make them available to the general riding public. Works Connection continues that original idea today through constant evolution and expansion of their unique product line developed from ‘race-tested’ feedback and product research. 

For more information on Works Connection products, go to worksconnection.com

WORKS CONNECTION
4130 Product Drive
Cameron Park, CA 95682
OFFICE:   530-642-9488, Ext201
FAX:         530-672-9386

Tuesday
Feb252020

Tusk Sliding Sag Scale

 This is a must have tool if you want your race bike to handle properly.

Details

    The Tusk Sliding Sag Scale is a must-have tool to help you precisely set your motorcycle sag. "Race Sag" is a reference to your rear shock’s ride height with the rider on board and is critical for performance and safety. This scale is adjustable in length to work on any bike. Simply set the scale to zero with your bike on the stand and quickly see the exact "race sag" with the rider on the bike. The anodized aluminum body with laser etched scale is simple to use and very durable. The axle pin will fit hollow axle holes up to 24mm. When in need of quality parts and tools for your dirt bike, ATV or UTV, think Tusk!!!
  • A must-have tool to help you precisely set your motorcycle’s rear shock "sag".
  • Anodized aluminum body construction with an easy-to-read laser etched scale.
  • Makes setting sag quick, accurate, and simple.
  • Fits hollow axle holes up to 24mm.
Tuesday
Feb182020

New Works Connection Skid Plates

 

 

 

WORKS CONNECTION 2019-20 KTM 125SX 150SX / HUSQVARNA TC125 MX SKID PLATE

                                         PN 10-430         Retail $84.95                                             

Rocks, ruts and cased jumps can wreak havoc on your bikes frame and engine cases. But you can trust this Works Connection MX skid plate to provide the protection from those track hazards for your KTM 125/150SX or Husqvarna TC125. CNC’d bracket mounting makes it a snap to install. Protection and convenience all in one package.              

                                            Contact your retailer or visit worksconnection.com

 

  • ·         Coverage protects engine center cases and frame rails
  • ·         Proven R
  • ·         CNC’d and formed from aircraft grade 6061 T-6 aluminum
  • ·         CNC’d aluminum brackets with quality hardware for secure mounting
  • ·         Made in the USA

 

 

 

About Works Connection:

Established in 1989 with the desire to produce ‘Works’ type products and make them available to the general riding public. Works Connection continues that original idea today through constant evolution and expansion of their unique product line developed from ‘race-tested’ feedback and product research. 

For more information on Works Connection products, go to worksconnection.com

 

                                                                 Copyright © 2020 Works Connection, Inc., All rights reserved.

Shawn Ralls
WORKS CONNECTION
4130 Product Drive
Cameron Park, CA 95682
OFFICE:   530-642-9488, Ext201
FAX:         530-672-9386
 
shawn@worksconnection.com
worksconnection.com